SINO OPTIC

Features & Functionalities of Fiber Optic Connectors

sinooptic — Fri, 08 Mar 2019 05:14:26 +0000

Fiber connectivity has nowadays become a more affordable ways to upgrade your business. They serve varied purposes in diversified industries.

In the past, fiber optic connectors were unwieldy and difficult to use in the past. However, fiber optic connector supplier manufacturer in the present have standardized and simplified connectors greatly. With their ease to use and simplification, there has been increase in the use of fiber optic systems. They are playing an integral role in network performance nowadays.

As there has been development of varied kinds of fiber optic connectors, each of them has its own advantages, disadvantages, and capabilities. All of these fiber optic connectors usually have four basic components including ferrule, connector body, cable, and coupling device. They are usually designed to make sure fibre is glued at single place and is providing strain relief.

There is constant demand for fiber optic connectors ensuring low losses, low cost and easier terminations. The most commonly used connectors are the SC (Subscriber Connector), the ST (Straight Tip), and the FC (Fiber Connector). Besides, small form factor connectors are used in high-density optical transmission products. These connectors usually serve varied functions. When you are selecting a fiber optic connector for a particular application, it is very important to make sure its properties meet the needs of the particular application. You can take guidance from fiber optic connector supplier to choose the right product. While using fiber connectors, a worker should always make sure that there is no power present in the cable as a safety precaution.

The post Features & Functionalities of Fiber Optic Connectors appeared first on SINO OPTIC.

Significance and Uses of Indoor and Outdoor Fiber Optic Cable

sinooptic — Wed, 27 Feb 2019 06:44:25 +0000

With the rapid development of fiber optic communication technology, indoor and outdoor fiber optic cables are popularly used for varied applications in diversified industries. A fiber optic patch cord supplier provide fiber optic cables with various structures to suit different applications.

Outdoor fiber optic cables

Outdoor fiber optic cable is typically designed to operate safely in complex outdoor environment, often influenced by changes. These cables usually have loose buffer design, while strengthen member in the middle of the whole cable. There are loose tubes surrounding central strength member carrying waterproof gel filled and whole cable materials to make whole cable resist of water.These cables have rugged structures to resist ultra-violet light and temperature fluctuations. The most common types of outdoor fiber optic cables are GYTS, GYTA, GYXTW, GYTA53, GYTY53 and GYTC8S. These cables are designed to withstand demanding outdoor conditions due to changes in environment as well as mechanical forces. They can be often found strung along telephone poles or installed inside an underground duct.

For aerial and duct applications, GYTS, GYTA and GYXTW are used.
GYTA53 and GYTY53 are used for direct buried
GYTC8S the figure 8 outdoor fiber optic cable is used mainly for aerial.

When you are buying outdoor fiber optic cable, you need to consider many different factors such as specific environment, ultraviolet etc.

Indoor fiber optic cables

Indoor fiber optic cables are installed between and inside buildings. The common types of indoor fiber optic cables are GJFJV, GJFJZY, GJFJBV, GJFJBZY, GJFDBV and GJFDBZY. These cables experience lesser temperature and mechanical stress than outdoor used fiber cables. They are usually tight buffer design. They are typically consisting of the FRP which is non-metallic strengthen member, the tight buffer optical fiber and the Kevlarand the cable outer jacket.LSZH or other RoHS compliant PVC materials are generally used to make cable jacket. It is essential for indoor cables have flame retardant jacket as they are used inside the building.

Single mode indoor fiber optic cables are installed between the buildings where the distance is more than hundred meters. These cables might be deployed in a duct or cable tray. It is essential to consider fire prevention requirements while deploying them. Multimode indoor fiber optic cables are used for shorter distance connections.

There has been significant increase in the demand for a fiber-optic cable suitable for indoor and outdoor environments meeting harsh requirements of indoor and outdoor applications i.e. fire prevention, resistance to cold and moisture. A fiber optic patch cord supplier can help you in finding the right cable to suit your applications, while ensuring safety and other factors.

The post Significance and Uses of Indoor and Outdoor Fiber Optic Cable appeared first on SINO OPTIC.

Working of Outdoor Fiber Optic Cable & Fiber Optic Adapter

sinooptic — Mon, 03 Dec 2018 12:42:24 +0000

Experience and exquisite technologies can provide customers with high-quality and high-performance outdoor fiber optic cable solutions that meets their different needs. With professional technical support as well as excellent services one can offer one-stop service, high standards and cost effective products.

Outdoor fiber optic cable is applied to protect the optical fiber to operate safely in harsh outdoor environment. The majority of outdoor fiber cables are loose buffer design, with the reinforce member in the central of the whole cable, the loose tubes surround the central strength member. Inner parts of the loose tube there is waterproof gel filled, entire cable materials used and gels inside cable between the different components helps make the cable resistant to leak and water.The designs make use of250µm fibers in both central & multi loose tube constructions ranging in optical fiber counts from 2 to 288. It is available in both armored and non-armored type.

Fiber optic adapter are applied in fiber optic connection. It has the distinctive use to provide a cable to cable fiber connection. It is also known as mating sleeves and hybrid adaptors. Mating sleevesadapter is used to connect the same type fiber optic connectors, while hybrid adaptors are used to connect diverse types of fiber optic connectors. Single mode and multimode optic fibre connectors are also available. It is consistent solution for fiber connections when high quality & standard is maintained while manufacturing. Fiber optic adapters available in the market are – FC, SC, ST, LC, MT-RJ, MU, simplex, E2000, FC/APC, duplex, SC/APC, LC/APC, E2000/APC ,quad, mating sleeves, hybrid fiber optic adapters, Single mode fiber optic adapters, multimode fiber optic adapters.

The post Working of Outdoor Fiber Optic Cable & Fiber Optic Adapter appeared first on SINO OPTIC.

What are the Advantages of Fiber Optic Cable Assemblies?

sinooptic — Tue, 27 Nov 2018 04:32:23 +0000

Fiber optic cable assemblies involve an optical fiber, a strengthening strand for support, and fiber optic connectors. While copper wires depend on electrical pulses to transmit data, fiber optic systems rely on light pulse transmissions carried through the cable, and these cables delivers data at a faster pace.

What you need to consider before purchasing fiber optic cable assemblies? Prior of making investment in a fiber optic cable assembly, manufacturers usually consider quite a few aspects that includes the intended use of the fiber optics system, the amount of data you require to be transmitted, analyzing the potential growth of the organization in coming years, and most importantly the existing fiber optic cable assemblies use in the present time. Understanding the need and offering that suits best such as a small network requires only short distance communication and affordable multimode-fibers will be beneficial for them. Single-mode fibers are suitable for communication over long distances, where there is risk of distortion.

Fiber optic ceramic ferrule is the most vital component of Fiber Connectors and Fiber Patch cord. It is made up of various materials, like plastics, stainless steel, and ceramic (zirconia). Most of the ferrules used in optical connectors are made of ceramic (Zirconia) material as it has most of the required properties. The ceramic (zirconia) ferrule size for ST, FC and SC fiber connectors is φ2.5mm, while for the MU and LC fiber connector versions is φ1.25 mm. It incorporates low insertion loss which is required for optical transmission, amazing strength, small elasticity coefficient, easy control of product characteristics, and strong resistance to extreme environmental conditions.

The post What are the Advantages of Fiber Optic Cable Assemblies? appeared first on SINO OPTIC.

Fiber Optic Splitter & It’s Working

sinooptic — Thu, 01 Nov 2018 12:12:50 +0000

A fiber optic splitter also called optical splitter which splits the fiber optic light into more than a few parts by a certain ratio. It plays a significant part in a passive optical network (EPON, GPON, BPON, FTTX, FTTH and more) by permitting a single PON interface to be shared among lots of patrons or to connect the MDF and the terminal device and to branch the optical signal. As stated above, to get this result, it is designed to split light beam into many more light beams and couple the light beams to the branch distribution as an optical fiber tandem device. The application helps in enhancing the performance of network circuits.

Typically, fiber optic splitters can be divided into two types: Fused Biconical Taper (FBT) splitter and Planar Lightwave Circuit (PLC) splitters. Fiber optic splitter with various input and output terminals to get the branch of the light beams and maximize the functionality of the network circuits. Recent years have seen rapid growth of optical network, more and more experts and creations doing value addition to fiber optic splitter, and optimization of applications is making it more popular.

Fiber optic cable manufacturers are very focused and also much concerned with manufacturing competence and expense optimization. Cutthroat competition around the globe in the fiber optic cable market not only putting significant pressure on the prices but on the makes also. With ever fluctuating cost of raw material adds the pressure and constraints. But on a positive side, you will be benefited by this scenario, as you can get the best quality cable at very competitive rates, and designs that are unique with multi-integrational functions.

The post Fiber Optic Splitter & It’s Working appeared first on SINO OPTIC.

Fiber Optic Patch Cables

sinooptic — Wed, 31 Oct 2018 11:55:43 +0000

Fiber optic patch cable also called fiber optic patch cord or fiber jumper cable, it is concluded with fiber optic connectors on both ends. This is typically for indoor applications. Cables are used for computer workstation to outlet and fiber optic patch panels or optical cross connect distribution point. The types or kinds of fiber optic patch cables can be determined by various fiber cable mode, cable structure, connector types, connector polishing types and cable sizes. In the mode section comes single mode fiber patch cables applies 9/125 micron. While multimode fiber patch cables use 62.5/125 micron or 50/125 micron. 10gig multimode aqua fiber optic patch cables are specifically made up of 50/125 micron fiber optimized for 850nm VCSEL laser based 10Gig Ethernet. It provides three times the bandwidth compared to the 62.5 micron multimode fibers. It increases durability and accuracy. Fiber optic adapters as the name suggest is specially designed to connect two fiber optic cables together. The adapters come in different types such as single fibers together (simplex), two fibers together (duplex), or sometimes four fibers together (quad) to connect. It is an ideal product for applications that needs cable-to-cable connections. Fiber optic adapters are characteristically connecting cables with similar connectors (SC to SC, LC to LC, etc.). Few adapters are hybrid that connect different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters. Due to the complex design and manufacturing intricacies, the expense goes high, and it effects the cost of these adapters which are relatively on higher side.

The post Fiber Optic Patch Cables appeared first on SINO OPTIC.

Different Functions of Some Types of Fiber Optic Splitter

sinooptic — Wed, 03 Oct 2018 10:05:44 +0000

Fiber Optic splitter is responsible for splitting up the network, resulting in the sharing of the optical fiber amongst multiple users. There are various types of fiber optic splitter available with different functionalities. Have a look:

PLC Splitter
Fused fiber splitter
FTTH Splitter

Let us discuss them in detail: PLC Splitter: PLC that is planar light wave circular splitter is known for its good channel to channel uniformity, high reliability and small size with wide operating wavelength. It is made up of silica optical waveguide technology. It is used in optical signal power management and in PON networks. SINO OPTIC provides series of splitters that meet GR-1209-CORE and GR-1221-CORE and are certified by TLC for network development along with fiber optic ceramic ferrule. Fused fiber splitter: it is basically used forwavelength multi/demultiplexing or branching/combining of optical signal. They not only combine optical signals from two fibers into one fiber but also split optical signals between two fibers. FTTH Splitter: it is a kind of passive optical splitter mainly used in CATV networks. It protects the connection between fiber cable and pigtails and are suitable for the ABS or LGX packed splitters. SINO OPTIC has pioneered proprietary products of fiber optic connectors, fiber optic patch cables, fiber optic cables, fiber optic adapters, fiber optic splitters, fiber optic ceramic ferrules & sleeves, fiber optic attenuators, etc. Many of which are now considered one of the best benchmark in the industry.

The post Different Functions of Some Types of Fiber Optic Splitter appeared first on SINO OPTIC.

Why Switch To Fiber Optics?

sinooptic — Wed, 29 Aug 2018 05:59:00 +0000

Fiber Optics has been here for more than a decade and has been dominating our lives for a long time. They are even great for the business as they have following benefits as follows:

Speed: Fiber Optics is packed up for the transmission nearly at the speed of light. Since the fiber optics is based upon the transmission with the help of the optics, the transmission can be done at a speed of 5 Mbps to 100 Gbps. That is a great speed when it comes to the business
Reliable: Fiber Optic cables are much more reliable than the copper cables.
Signal Strength: The signal of the copper wire starts to decrease when it moves away from the switch. However, the in-fiber optics cables, the signal is not decreased with the increase in the distance.

With so many benefits on hand, you should switch to the fiber optics. You can do it with us as we have high quality fiber optic patch cables. There are n-number of companies that deal with fiber optic products and claim that they are the best in the industry. This is merely a myth. Therefore, keep your eyes wide open while selecting a right source to order your need. “Sino Optic” is into this industry for years now and hence have gained a long list of loyal customers. We at Sino Optic provides you with the best fiber optics products as we provide the best fiber optic connectors in town. So, go on and have a look at our products now.

The post Why Switch To Fiber Optics? appeared first on SINO OPTIC.